/*!
 * @file Adafruit_LEDBackpack.cpp
 *
 * @mainpage Adafruit LED Backpack library for Arduino.
 *
 * @section intro_sec Introduction
 *
 * This is an Arduino library for our I2C LED Backpacks:
 * ----> http://www.adafruit.com/products/
 * ----> http://www.adafruit.com/products/
 *
 * These displays use I2C to communicate, 2 pins are required to
 * interface. There are multiple selectable I2C addresses. For backpacks
 * with 2 Address Select pins: 0x70, 0x71, 0x72 or 0x73. For backpacks
 * with 3 Address Select pins: 0x70 thru 0x77
 *
 * Adafruit invests time and resources providing this open source code,
 * please support Adafruit and open-source hardware by purchasing
 * products from Adafruit!
 *
 * @section dependencies Dependencies
 *
 * This library depends on <a
 * href="https://github.com/adafruit/Adafruit-GFX-Library"> Adafruit_GFX</a>
 * being present on your system. Please make sure you have installed the latest
 * version before using this library.
 *
 * @section author Author
 *
 * Written by Limor Fried/Ladyada for Adafruit Industries.
 *
 * @section license License
 *
 * MIT license, all text above must be included in any redistribution
 *
 */

#include <Wire.h>

#include "Adafruit_GFX.h"
#include "Adafruit_LEDBackpack.h"

#ifndef _BV
#define _BV(bit) (1 << (bit)) ///< Bit-value if not defined by Arduino
#endif

#ifndef _swap_int16_t
#define _swap_int16_t(a, b)                                                    \
  {                                                                            \
    int16_t t = a;                                                             \
    a = b;                                                                     \
    b = t;                                                                     \
  } ///< 16-bit var swap
#endif

static const uint8_t numbertable[] = {
    0x3F, /* 0 */
    0x06, /* 1 */
    0x5B, /* 2 */
    0x4F, /* 3 */
    0x66, /* 4 */
    0x6D, /* 5 */
    0x7D, /* 6 */
    0x07, /* 7 */
    0x7F, /* 8 */
    0x6F, /* 9 */
    0x77, /* a */
    0x7C, /* b */
    0x39, /* C */
    0x5E, /* d */
    0x79, /* E */
    0x71, /* F */
};

static const uint16_t alphafonttable[] PROGMEM = {

    0b0000000000000001, 0b0000000000000010, 0b0000000000000100,
    0b0000000000001000, 0b0000000000010000, 0b0000000000100000,
    0b0000000001000000, 0b0000000010000000, 0b0000000100000000,
    0b0000001000000000, 0b0000010000000000, 0b0000100000000000,
    0b0001000000000000, 0b0010000000000000, 0b0100000000000000,
    0b1000000000000000, 0b0000000000000000, 0b0000000000000000,
    0b0000000000000000, 0b0000000000000000, 0b0000000000000000,
    0b0000000000000000, 0b0000000000000000, 0b0000000000000000,
    0b0001001011001001, 0b0001010111000000, 0b0001001011111001,
    0b0000000011100011, 0b0000010100110000, 0b0001001011001000,
    0b0011101000000000, 0b0001011100000000,
    0b0000000000000000, //
    0b0000000000000110, // !
    0b0000001000100000, // "
    0b0001001011001110, // #
    0b0001001011101101, // $
    0b0000110000100100, // %
    0b0010001101011101, // &
    0b0000010000000000, // '
    0b0010010000000000, // (
    0b0000100100000000, // )
    0b0011111111000000, // *
    0b0001001011000000, // +
    0b0000100000000000, // ,
    0b0000000011000000, // -
    0b0000000000000000, // .
    0b0000110000000000, // /
    0b0000110000111111, // 0
    0b0000000000000110, // 1
    0b0000000011011011, // 2
    0b0000000010001111, // 3
    0b0000000011100110, // 4
    0b0010000001101001, // 5
    0b0000000011111101, // 6
    0b0000000000000111, // 7
    0b0000000011111111, // 8
    0b0000000011101111, // 9
    0b0001001000000000, // :
    0b0000101000000000, // ;
    0b0010010000000000, // <
    0b0000000011001000, // =
    0b0000100100000000, // >
    0b0001000010000011, // ?
    0b0000001010111011, // @
    0b0000000011110111, // A
    0b0001001010001111, // B
    0b0000000000111001, // C
    0b0001001000001111, // D
    0b0000000011111001, // E
    0b0000000001110001, // F
    0b0000000010111101, // G
    0b0000000011110110, // H
    0b0001001000000000, // I
    0b0000000000011110, // J
    0b0010010001110000, // K
    0b0000000000111000, // L
    0b0000010100110110, // M
    0b0010000100110110, // N
    0b0000000000111111, // O
    0b0000000011110011, // P
    0b0010000000111111, // Q
    0b0010000011110011, // R
    0b0000000011101101, // S
    0b0001001000000001, // T
    0b0000000000111110, // U
    0b0000110000110000, // V
    0b0010100000110110, // W
    0b0010110100000000, // X
    0b0001010100000000, // Y
    0b0000110000001001, // Z
    0b0000000000111001, // [
    0b0010000100000000, //
    0b0000000000001111, // ]
    0b0000110000000011, // ^
    0b0000000000001000, // _
    0b0000000100000000, // `
    0b0001000001011000, // a
    0b0010000001111000, // b
    0b0000000011011000, // c
    0b0000100010001110, // d
    0b0000100001011000, // e
    0b0000000001110001, // f
    0b0000010010001110, // g
    0b0001000001110000, // h
    0b0001000000000000, // i
    0b0000000000001110, // j
    0b0011011000000000, // k
    0b0000000000110000, // l
    0b0001000011010100, // m
    0b0001000001010000, // n
    0b0000000011011100, // o
    0b0000000101110000, // p
    0b0000010010000110, // q
    0b0000000001010000, // r
    0b0010000010001000, // s
    0b0000000001111000, // t
    0b0000000000011100, // u
    0b0010000000000100, // v
    0b0010100000010100, // w
    0b0010100011000000, // x
    0b0010000000001100, // y
    0b0000100001001000, // z
    0b0000100101001001, // {
    0b0001001000000000, // |
    0b0010010010001001, // }
    0b0000010100100000, // ~
    0b0011111111111111,

};
void Adafruit_LEDBackpack::setBrightness(uint8_t b) {
  if (b > 15)
    b = 15;
  Wire.beginTransmission(i2c_addr);
  Wire.write(HT16K33_CMD_BRIGHTNESS | b);
  Wire.endTransmission();
}

void Adafruit_LEDBackpack::blinkRate(uint8_t b) {
  Wire.beginTransmission(i2c_addr);
  if (b > 3)
    b = 0; // turn off if not sure

  Wire.write(HT16K33_BLINK_CMD | HT16K33_BLINK_DISPLAYON | (b << 1));
  Wire.endTransmission();
}

Adafruit_LEDBackpack::Adafruit_LEDBackpack(void) {}

void Adafruit_LEDBackpack::begin(uint8_t _addr = 0x70) {
  i2c_addr = _addr;

  Wire.begin();

  Wire.beginTransmission(i2c_addr);
  Wire.write(0x21); // turn on oscillator
  Wire.endTransmission();

  // internal RAM powers up with garbage/random values.
  // ensure internal RAM is cleared before turning on display
  // this ensures that no garbage pixels show up on the display
  // when it is turned on.
  clear();
  writeDisplay();

  blinkRate(HT16K33_BLINK_OFF);

  setBrightness(15); // max brightness
}

void Adafruit_LEDBackpack::writeDisplay(void) {
  Wire.beginTransmission(i2c_addr);
  Wire.write((uint8_t)0x00); // start at address $00

  for (uint8_t i = 0; i < 8; i++) {
    Wire.write(displaybuffer[i] & 0xFF);
    Wire.write(displaybuffer[i] >> 8);
  }
  Wire.endTransmission();
}

void Adafruit_LEDBackpack::clear(void) {
  for (uint8_t i = 0; i < 8; i++) {
    displaybuffer[i] = 0;
  }
}

/******************************* QUAD ALPHANUM OBJECT */

Adafruit_AlphaNum4::Adafruit_AlphaNum4(void) {}

void Adafruit_AlphaNum4::writeDigitRaw(uint8_t n, uint16_t bitmask) {
  displaybuffer[n] = bitmask;
}

void Adafruit_AlphaNum4::writeDigitAscii(uint8_t n, uint8_t a, bool d) {
  uint16_t font = pgm_read_word(alphafonttable + a);

  displaybuffer[n] = font;

  /*
  Serial.print(a, DEC);
  Serial.print(" / '"); Serial.write(a);
  Serial.print("' = 0x"); Serial.println(font, HEX);
  */

  if (d)
    displaybuffer[n] |= (1 << 14);
}

/******************************* 24 BARGRAPH OBJECT */

Adafruit_24bargraph::Adafruit_24bargraph(void) {}

void Adafruit_24bargraph::setBar(uint8_t bar, uint8_t color) {
  uint16_t a, c;

  if (bar < 12)
    c = bar / 4;
  else
    c = (bar - 12) / 4;

  a = bar % 4;
  if (bar >= 12)
    a += 4;

  // Serial.print("Ano = "); Serial.print(a); Serial.print(" Cath = ");
  // Serial.println(c);
  if (color == LED_RED) {
    // Turn on red LED.
    displaybuffer[c] |= _BV(a);
    // Turn off green LED.
    displaybuffer[c] &= ~_BV(a + 8);
  } else if (color == LED_YELLOW) {
    // Turn on red and green LED.
    displaybuffer[c] |= _BV(a) | _BV(a + 8);
  } else if (color == LED_OFF) {
    // Turn off red and green LED.
    displaybuffer[c] &= ~_BV(a) & ~_BV(a + 8);
  } else if (color == LED_GREEN) {
    // Turn on green LED.
    displaybuffer[c] |= _BV(a + 8);
    // Turn off red LED.
    displaybuffer[c] &= ~_BV(a);
  }
}

/******************************* 16x8 MATRIX OBJECT */

Adafruit_8x16matrix::Adafruit_8x16matrix(void) : Adafruit_GFX(8, 16) {}

void Adafruit_8x16matrix::drawPixel(int16_t x, int16_t y, uint16_t color) {

  // check rotation, move pixel around if necessary
  switch (getRotation()) {
  case 2:
    _swap_int16_t(x, y);
    x = 16 - x - 1;
    break;
  case 3:
    x = 16 - x - 1;
    y = 8 - y - 1;
    break;
  case 0:
    _swap_int16_t(x, y);
    y = 8 - y - 1;
    break;
  }
  /*
  Serial.print("("); Serial.print(x);
  Serial.print(","); Serial.print(y);
  Serial.println(")");
  */

  if ((y < 0) || (y >= 8))
    return;
  if ((x < 0) || (x >= 16))
    return;

  if (color) {
    displaybuffer[y] |= 1 << x;
  } else {
    displaybuffer[y] &= ~(1 << x);
  }
}

/******************************* 16x8 MINI MATRIX OBJECT */

Adafruit_8x16minimatrix::Adafruit_8x16minimatrix(void) : Adafruit_GFX(8, 16) {}

void Adafruit_8x16minimatrix::drawPixel(int16_t x, int16_t y, uint16_t color) {

  if ((y < 0) || (x < 0))
    return;
  if ((getRotation() % 2 == 0) && ((y >= 16) || (x >= 8)))
    return;
  if ((getRotation() % 2 == 1) && ((x >= 16) || (y >= 8)))
    return;

  // check rotation, move pixel around if necessary
  switch (getRotation()) {
  case 2:
    if (y >= 8) {
      x += 8;
      y -= 8;
    }
    _swap_int16_t(x, y);
    break;
  case 3:
    x = 16 - x - 1;
    if (x >= 8) {
      x -= 8;
      y += 8;
    }
    break;
  case 0:
    y = 16 - y - 1;
    x = 8 - x - 1;
    if (y >= 8) {
      x += 8;
      y -= 8;
    }
    _swap_int16_t(x, y);
    break;
  case 1:
    y = 8 - y - 1;
    if (x >= 8) {
      x -= 8;
      y += 8;
    }
    break;
  }

  if (color) {
    displaybuffer[x] |= 1 << y;
  } else {
    displaybuffer[x] &= ~(1 << y);
  }
}

/******************************* 8x8 MATRIX OBJECT */

Adafruit_8x8matrix::Adafruit_8x8matrix(void) : Adafruit_GFX(8, 8) {}

void Adafruit_8x8matrix::drawPixel(int16_t x, int16_t y, uint16_t color) {
  if ((y < 0) || (y >= 8))
    return;
  if ((x < 0) || (x >= 8))
    return;

  // check rotation, move pixel around if necessary
  switch (getRotation()) {
  case 1:
    _swap_int16_t(x, y);
    x = 8 - x - 1;
    break;
  case 2:
    x = 8 - x - 1;
    y = 8 - y - 1;
    break;
  case 3:
    _swap_int16_t(x, y);
    y = 8 - y - 1;
    break;
  }

  // wrap around the x
  x += 7;
  x %= 8;

  if (color) {
    displaybuffer[y] |= 1 << x;
  } else {
    displaybuffer[y] &= ~(1 << x);
  }
}

/******************************* 8x8 BICOLOR MATRIX OBJECT */

Adafruit_BicolorMatrix::Adafruit_BicolorMatrix(void) : Adafruit_GFX(8, 8) {}

void Adafruit_BicolorMatrix::drawPixel(int16_t x, int16_t y, uint16_t color) {
  if ((y < 0) || (y >= 8))
    return;
  if ((x < 0) || (x >= 8))
    return;

  switch (getRotation()) {
  case 1:
    _swap_int16_t(x, y);
    x = 8 - x - 1;
    break;
  case 2:
    x = 8 - x - 1;
    y = 8 - y - 1;
    break;
  case 3:
    _swap_int16_t(x, y);
    y = 8 - y - 1;
    break;
  }

  if (color == LED_GREEN) {
    // Turn on green LED.
    displaybuffer[y] |= 1 << x;
    // Turn off red LED.
    displaybuffer[y] &= ~(1 << (x + 8));
  } else if (color == LED_RED) {
    // Turn on red LED.
    displaybuffer[y] |= 1 << (x + 8);
    // Turn off green LED.
    displaybuffer[y] &= ~(1 << x);
  } else if (color == LED_YELLOW) {
    // Turn on green and red LED.
    displaybuffer[y] |= (1 << (x + 8)) | (1 << x);
  } else if (color == LED_OFF) {
    // Turn off green and red LED.
    displaybuffer[y] &= ~(1 << x) & ~(1 << (x + 8));
  }
}

/******************************* 7 SEGMENT OBJECT */

Adafruit_7segment::Adafruit_7segment(void) { position = 0; }

void Adafruit_7segment::print(unsigned long n, int base) {
  if (base == 0)
    write(n);
  else
    printNumber(n, base);
}

void Adafruit_7segment::print(char c, int base) { print((long)c, base); }

void Adafruit_7segment::print(unsigned char b, int base) {
  print((unsigned long)b, base);
}

void Adafruit_7segment::print(int n, int base) { print((long)n, base); }

void Adafruit_7segment::print(unsigned int n, int base) {
  print((unsigned long)n, base);
}

void Adafruit_7segment::println(void) { position = 0; }

void Adafruit_7segment::println(char c, int base) {
  print(c, base);
  println();
}

void Adafruit_7segment::println(unsigned char b, int base) {
  print(b, base);
  println();
}

void Adafruit_7segment::println(int n, int base) {
  print(n, base);
  println();
}

void Adafruit_7segment::println(unsigned int n, int base) {
  print(n, base);
  println();
}

void Adafruit_7segment::println(long n, int base) {
  print(n, base);
  println();
}

void Adafruit_7segment::println(unsigned long n, int base) {
  print(n, base);
  println();
}

void Adafruit_7segment::println(double n, int digits) {
  print(n, digits);
  println();
}

void Adafruit_7segment::print(double n, int digits) { printFloat(n, digits); }

size_t Adafruit_7segment::write(uint8_t c) {

  uint8_t r = 0;

  if (c == '\n')
    position = 0;
  if (c == '\r')
    position = 0;

  if ((c >= '0') && (c <= '9')) {
    writeDigitNum(position, c - '0');
    r = 1;
  }

  position++;
  if (position == 2)
    position++;

  return r;
}

void Adafruit_7segment::writeDigitRaw(uint8_t d, uint8_t bitmask) {
  if (d > 4)
    return;
  displaybuffer[d] = bitmask;
}

void Adafruit_7segment::drawColon(bool state) {
  if (state)
    displaybuffer[2] = 0x2;
  else
    displaybuffer[2] = 0;
}

void Adafruit_7segment::writeColon(void) {
  Wire.beginTransmission(i2c_addr);
  Wire.write((uint8_t)0x04); // start at address $02

  Wire.write(displaybuffer[2] & 0xFF);
  Wire.write(displaybuffer[2] >> 8);

  Wire.endTransmission();
}

void Adafruit_7segment::writeDigitNum(uint8_t d, uint8_t num, bool dot) {
  if (d > 4)
    return;

  writeDigitRaw(d, numbertable[num] | (dot << 7));
}

void Adafruit_7segment::print(long n, int base) { printNumber(n, base); }

void Adafruit_7segment::printNumber(long n, uint8_t base) {
  printFloat(n, 0, base);
}

void Adafruit_7segment::printFloat(double n, uint8_t fracDigits, uint8_t base) {
  uint8_t numericDigits = 4; // available digits on display
  bool isNegative = false;   // true if the number is negative

  // is the number negative?
  if (n < 0) {
    isNegative = true; // need to draw sign later
    --numericDigits;   // the sign will take up one digit
    n *= -1;           // pretend the number is positive
  }

  // calculate the factor required to shift all fractional digits
  // into the integer part of the number
  double toIntFactor = 1.0;
  for (int i = 0; i < fracDigits; ++i)
    toIntFactor *= base;

  // create integer containing digits to display by applying
  // shifting factor and rounding adjustment
  uint32_t displayNumber = n * toIntFactor + 0.5;

  // calculate upper bound on displayNumber given
  // available digits on display
  uint32_t tooBig = 1;
  for (int i = 0; i < numericDigits; ++i)
    tooBig *= base;

  // if displayNumber is too large, try fewer fractional digits
  while (displayNumber >= tooBig) {
    --fracDigits;
    toIntFactor /= base;
    displayNumber = n * toIntFactor + 0.5;
  }

  // did toIntFactor shift the decimal off the display?
  if (toIntFactor < 1) {
    printError();
  } else {
    // otherwise, display the number
    int8_t displayPos = 4;

    if (displayNumber) // if displayNumber is not 0
    {
      for (uint8_t i = 0; displayNumber || i <= fracDigits; ++i) {
        bool displayDecimal = (fracDigits != 0 && i == fracDigits);
        writeDigitNum(displayPos--, displayNumber % base, displayDecimal);
        if (displayPos == 2)
          writeDigitRaw(displayPos--, 0x00);
        displayNumber /= base;
      }
    } else {
      writeDigitNum(displayPos--, 0, false);
    }

    // display negative sign if negative
    if (isNegative)
      writeDigitRaw(displayPos--, 0x40);

    // clear remaining display positions
    while (displayPos >= 0)
      writeDigitRaw(displayPos--, 0x00);
  }
}

void Adafruit_7segment::printError(void) {
  for (uint8_t i = 0; i < SEVENSEG_DIGITS; ++i) {
    writeDigitRaw(i, (i == 2 ? 0x00 : 0x40));
  }
}